|
 Mighty
Mini SST Online Ordering
The ideal solution to unwanted oil in coolants and parts washers therefore
extending the life of cooling and wash water! The Abanaki Mighty Mini
SST can remove 1 to 2 gallons of medium weight oil per hour (depending on
belt selection). Its stainless steel construction
enables it to operate in harsh chemicals and heat while its integrated timer
lets it run only when needed. The Mighty Mini SST is
designed to minimize water content in the disposed oil; however the optional
Oil
Concentrator® will further reduce
the water content in the oil to less than 2%. This is a tremendous cost saving
if the oil is to be recycled or disposed.
It is compact making efficient use of available space... it fits underneath
most CNC machines as well as inside parts washers. The small footprint even
allows the Mighty Mini SST to fit through the bung hole of a 55
gallon drum! With belts specifically selected for your application available
in lengths of 6, 12, 18 and 24" (see Belt
Selection page), this skimmer has endless application
possibilities.
The Mighty Mini SST weighs in at only 8 pounds and the ease of
installation make this skimmer the most versatile of our line. Use it here
today and there tomorrow as it installs in just seconds.
Features
- Integrated 24 hour timer
- Fan cooled motor
- Belts available 1" and 2" wide; materials specifically
selected for your application (see Belt
Selection page)
- Both sides of belt are wiped for better efficiency
- Chip resistant, baked on, powder-coated base and housing
- Spring loaded stabilizer bar
- 3-foot clear discharge hose and clamp
- 8-foot grounded power cord w/plug
- Stainless steel construction
Advantages
- Smallest and lightest of the Abanaki skimmer line
- Easily hand carried to the source of the problem
- Removes oil at rates up to 2 gallons per hour
- Designed for tank depths from 6" to 24"
- Belt and tail pulley can fit through a 2" diameter bung hole
- Great for automotive and mobile equipment service shops
- VERY affordable even for small businesses
Case
Studies
Specifications
| Oil Removal Rate: |
Model MM 100ST-06: 1 gph (3.8 lph) with 1 in. (25.4 mm)
wide belt, 6 in. (153 mm) length
Model MM 100ST-12: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide belt, 12 in.
(305 mm) length
Model MM 100ST-18: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide belt, 18 in.
(458 mm) length
Model MM 100ST-24: 1 gph (3.8 lph) with 1 in. (25.4 mm) wide belt, 24 in.
(610 mm) length
Model MM 200ST-06: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide belt, 6 in.
(153 mm) length
Model MM 200ST-12: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide belt, 12 in.
(305 mm) length
Model MM 200ST-18: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide belt, 18 in.
(458 mm) length
Model MM 200ST-24: 2 gph (5.7 lph) with 2 in. (50.8 mm) wide belt, 24 in.
(610 mm) length |
| Motor: |
Fractional hp TEFC, 115 or 220 VAC, single phase, 60 Hz gear
motor, including 8 foot cord with electrical plug
Optional: 50 Hz motor is available |
| Belt Material: |
Specifically selected for your application (see
Belt
Selection page) |
| Wiper Material: |
Consult factory for the material appropriate for your application. |
| Mounting Method: |
Flat base mount with oil discharge through a 3/4 in. ID hose |
| Specification Notes: |
- The Mighty Mini SST is UPS shippable.
- Consult factory for recommendations covering operating conditions
not listed here.
|
Contact
Abanaki
|
